CONVENTIONAL FIRE ALARM SYSTEM

Conventional Fire Alarm Control Panel is a 24volt, 2 or 4 zones, Class B, Conventional Fire Alarm Control Panel. It is designed exclusively to meet the latest market requirements and microprocessor technology, with stand-by batteries. It has functions of operation indication, fault indication, alarm..

FeaturesPlug-type structure is installed easily and reliablyAfter the metal dome is pressed, a special key shall be used to reset it manually.The hardware circuit is stable and reliable and is not affected by electromagnetic interference.After the metal dome is pressed, the manual button provides se..

The ultraviolet Infrared flame detector uses a new type of narrow-band current-type infrared pyroelectric sensor and solar blind ultraviolet photoelectric, combined with built-in 32-bit micro-processing and composite signal processing algorithms, the flame signal can be quickly identified, and the r..

Our Heat Sensors for alarm system, with temperature sensing signal processing technique, stable operation, easy installment, and flexible output mode for adapting various alarm control panels. This product is widely used in houses, hotels, schools storage, etc.FeaturesExcellent performance, low powe..

Temperature sensing signal processing technique. The Manual Call Point is tough, durable, and highly visible. An alarm LED is provided inside the call point to indicate the alarm condition. There is transparent glass protecting the MCP from the front side. A small MS powder-coated hammer is att..

Response Indicators are connected to automatic fire detectors in order to indicate quickly the source of an alarm signal from detectors that are not easily accessible or visible. The Response Indicators contain two LEDs to indicate Fire.FeaturesCompatibility with all DetectorsDual LED LampABS Plasti..

It is an intelligent smoke detector, which can be configured with an Addressable Fire Alarm Control Panel. Each point (device) can be given a specific ID, which allows the panel to continuously monitor a specific detector location (point). It reduces the maintenance cost and makes it easier to maint..

Our Smoke Sensors are for fire alarm systems, with photoelectric signal processing technique, stable operation, easy installment, and flexible output mode for adapting various alarm control panels. This product is widely used in houses, hotels, schools storage, etc.FeaturesPhotoelectric signal proce..

The sounders can be Flush/ceiling mounted with a back plate. The strobe light consists of a High glow LED Which gives a strong light that can be visible from a long distance. These sounders can be used for indoor applications only.FeaturesOperates on 24VDC100db at 30cmLow Current consumption..