PI-13-XD-125A
PI-13-XD-125A
$0.00
Ex Tax: $0.00
- Stock: In Stock
- Model: PI-13-XD-125A
Technical Specifications
| General | |
| Termination ( Applicable for Potted Model only) | WIRES i/p: Brown(L), Blue(N), o/p wires: Red(+),Black(-), Orange(0-10v), White(Gnd), DALI1, DALI2 (According to Model) |
| HV Test Across Shorted I/P and O/P | 3.5KV |
| Surge (Type Test) | ± 2.5 kV(DM) |
| Isolation Between I/P and O/P | Available |
| Termination | PCB Mounted Screw Terminal |
| PCB Type | GLASS EPOXY |
| Packing | INDIVIDUAL DRIVER WRAPPED IN TR |
| Output | |
| Rated Current | 350mA |
| Rated Power | 25.2 W |
| Current Tolerance | +/- 5% |
| Voltage Tolerance | +/- 5% |
| Line Regulation | +/- 5% |
| Load Regulation | +/- 5% |
| Ripple V/I | 2 Volt |
| Input (at Full Load @240 Vac) | |
| Supply Volts (Vn) | 240 VAC |
| Supply Current (in) | 120 mA AC |
| Watt (Pn) | 25 W |
| Current Crest Factor | <1.7 |
| Current THD % | <25% |
| Inrush Current | 4.9A @ 21 µsec |
| Efficiency | >80% |
| Dimming Control | |
| Signal Current Per Fixture | ANALOG DIMMING CURRENT <1mA, DALI DIMMING CURRENT <2mA |
| Dimming Option | 0-10V ANALOG DIMMING, DALI DIMMING |
| Dimming Signal | AT 10V SIGNAL – 100% OF OUTPUT CURRENT, AT 0V SIGNAL – 0% OF OUTPUT CURRENT DALI SIGNAL VOLT - 11.5 TO 22V (TYPICAL 16V) |
| Protection | |
| O/P Over Voltage | Available |
| I/P Over Voltage | NA |
| Overload | Available |
| Short Circuit | Available |
| I/P Fuse | Available |
| Reverse Polarity | Available |
| Thermal Cutoff | Available |
| Physical Characterstics | |
| Dimension (L*W*H) ( Applicable for Potted Model only) | 115(L)X41.7(W)X30(H)mm (+20mm length extra for Side Caps) |
| Maximum Temp. Tc (*2) | 80°C |
| Weight in Casing (Gms) | 110 |
| Driver Shape | Rectangular |
| Dimension (L x W x H) | 110 X 40 X 22 mm |
| Dimension - With Casing | 140 X 45 X 27.30 mm |
| Weight (in gram) | 77.5 |
| Operating Ambient Temperature (ta) | -10°C TO + 70°C |
| Weight in CASING (Gms) ( Applicable for Potted Model only) | 210 |
| Center to Center Dimension (Driver Casing) | 101 X 42 X 28 mm |
| Power Details | |
| Input Voltage | 48-70 VDC |
| Output Voltage | 145-277 VAC |
| Power Consumption | 70 VDC |
| Power Factor | >0.9 |
| Safety and EMC (Type Test) | |
| Safety Standard | IEC 61347-2-13 |
| Insulation Resistance | >500M OHM@1000VDC |
| EMC Emission | Compliance to EN55015, EN61000-3-3 |
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11 |
| Reliability Test (Type Test) | |
| Low Voltage Test | OK |
| High Voltage Test | OK |
| Temperature Test | 60°C, 1 MONTH |