 |
µC BASED INDICATOR CUM CONTROLLER |
|||||
|
||||||
| INPUT/OUTPUT | |
Input |
|
| T/C | J, K, R, S, N, E, T. |
| RTD | Pt - 100. |
| mA | 4 - 20 mA. |
| Range | |
| J | -120 to 760°C. |
| K | -180 to 1350°C. |
| R | 0 to 1760°C. |
| S | 0 to 1760°C. |
| N | 0 to 1300°C |
| E | -110 to 700°C. |
| T | 0 to 400°C. |
| PT100 | -150 to 840°C. |
| 4-20mA scaleable | -1999 to 9999. (Decimal point adjustable) |
| 0 - 1V | -1999 to 9999. (Decimal point adjustable) |
Display Red |
(i) 4 digit 7 segment LEDs 0.56” height. (ii) Individual red LED to indicate relay status & set point selection. |
OUTPUT |
(i) Upto 2 setpts with individual relay output, rated for 6A, 250VAC. (ii) Individual hysteresis setting for setpoints. |
CONTROLS |
UP, DN, MODE keys for operation programming & calibration. |
| GENERAL SPECIFICATIONS | |
ACJC |
Inbuilt & Automatic for T/C I/P |
Calibration |
Through Software of individual I/Ps. |
Burn out protection |
Upscale |
Linearity |
0.1% of span. |
Accuracy |
0.15% of span, ± 1 digit. |
Resolution |
0.1 LSB. |
Response time |
Within 1 second. |
Insulation resistance |
200MΩ at 1000 VDC. |
Insulation Strength |
Tested at 500 VAC between electronics & earth |
Watchdog timer |
Both H/W & S/W provided. |
| INSTALLATION | |
Power Supply |
(A) 110 VAC ±10%, 50Hz. (B) 230 VAC ±10%, 50Hz. |
Operating Temperature |
0 - 60°C. |
Operating Humidity |
5 - 95%. |
Storage Temperature |
0°C to 60°C. |
Mounting |
Panel Mounted. |
Terminals |
Screw terminal. |
Bezel Size |
48 x 96 mm. |
Cutout Size |
44 x 92 mm |
Weight |
Approx. 1kg |
