 |
|
|||||
|
||||||
| INPUT/OUTPUT | |
Input range |
0–63.5,110,230,440 & 750 VAC (ANY ONE ONLY) |
| Auxiliary Supply | 110 –220 VAC |
| Type of Display | 7 Segment Display. |
| Digit Size | 12.5 mm (0.5") height |
Display Colour |
Red \ Green. |
| GENERAL SPECIFICATIONS | |
Measuring Method |
Dual slope A/D Conversion |
Ambient Temp. |
0 - 60 °C. |
Anti Humidity Treat-ment |
2.5 Samples per Second |
Sampling Rate |
1 |
Over Range Indication |
Voltage1.2 times Continuous |
Maximum Overload |
2 KV at 50 Hz for 1min. between Input – Auxiliary and Case - Terminals |
Dielectric Strength |
Acryform conformal coating on PCB |
Phase Identificatoin |
Glowing LED on faceplate to identify R, Y, B, R-Y, Y-B, & B-R (as applicable) |
| Phase Selection | Push Button Switch on the Faceplate of the meter to scroll display from R, Y, B, R-Y, Y-B, & B-R |
|
(as applicable ) |
| INSTALLATION | |
| Accuracy (Specified at 27± 5°C )± (% rdg + dgt) | ( 0.5 + 3 ) |
Heat Test |
8 Hours at 70 °C. |
Adjustment |
Zero & Span are adjustable by two individual trimpots. |
Insulation Resistance |
200 MΩ at 1000 VDC |
VA Burden (Typical) |
Auxiliary : < 5VA |
Temperature |
ABS. |
Mounting |
Flush panel |
Housing |
ABS plastic |
| Size | 96X96X150 MM |
| 92X92 MM.. | |
Note: Specifications are subject to change without prior notice. Pyrotech Electronics Pvt. Ltd. F-16A, Road No. 3, M.I.A., Madri, Udaipur, 313 003, India. |
|
