 |
3-PHASE CURRENT INDICATOR |
|||||
|
||||||
| INPUT/OUTPUT | |
Input Range |
0-5A / 0-1A |
| Auxiliary Supply | 110/220 VAC (Any One) |
| Type of Display | 7 Segment Display |
| Digit Size | 12.5 mm (0.5") height |
Display Colour |
Red/Green |
| GENERAL SPECIFICATIONS | |
Measuring Method |
Dual slope A/D Conversion |
Anti HumidityTreatment |
Acryform Conformal coating on PCB. |
Sampling Rate |
2.5 Samples per Second |
Resolution |
0.001 to 1 count depending on the rang |
Over rang Indication |
“1” |
Maximum Overload |
Current 2 times Continuous |
| Phase Identification | Glowing LED on faceplate to identify R, Y,B(as applicable) |
| Phase Selection | Push Button Switch on the Faceplate of the meter to scroll display from R, Y, B (as applicable ) |
VA Burden (Typical) |
Auxiliary: < 5VA |
| PERFORMANCE | |
Accuracy (Specified at 27±5ºC) ±(%rdg+dgt) |
(0.5+3) |
| Heat Test | 8 Hours at 70 °C |
| Dielectric Strength | 2 KV at 50 HZ. for 1 min between Input _Auxillary and Case-Terminals. |
Adjustment |
Zero & Span are adjustable by two individual trim pots. |
Insulation resistance |
200Ω at 1000 VDC |
Operating ambient |
|
| Temperature | 0-60°C |
Mounting |
Flush Panel. |
Housing |
ABS.plastic |
| Size | 96X96X150 in mm |
Cutout Size |
92X92 in mm. |
