| INPUT/OUTPUT |
| Input |
110/230V AC |
| RTD |
Pt-100 |
| Range |
-200 °C to 840 °C |
| mA |
4-20mA |
| Range |
0 °C to 1999 °C |
| KTC |
0 °C to 1300 °C |
| JTC |
0 °C to 1000 °C |
|
| DISPLAY |
| Type of Display |
7 Segment Display |
| No. of Digits |
3 Digit for Channel No. & 4 Digit for Parameter Value. |
| Size Of Digits |
12.5 mm (0.5") Height |
| Display Colour |
Red |
|
| GENERAL SPECIFICATION |
| Mode of Operation |
|
| Auto Scan |
All Channel are sequentially scanned at the rate selectable from 2 to 12 sec. |
| Auto Acknowledge |
Once the trip condition has occured & then the process value changes such that it becomes less than Trip value, the Relay status & Led indication is acknowledged automatically. |
| Hold Mode |
Any particular channel & its reading can be held indefinitely. |
| Skip Facility |
Provided to skip undesired Channel. |
| Calibration |
Trough software of individual I/P's. |
| Accuracy |
± 0.5%, ± 1 Digit |
| Response Time |
within 3 sec. |
| Sesor Break & Short Circuit Protection |
Indication |
| Insulation Resistance |
200 MΩ at 1000 VDC |
| Watch Dog Timer |
Both H/W & S/W provided |
| Memory Retention |
EE-PROM (more than 5 years). |
| Anti-Humidity Treatment |
Acryform conformal coating on PCB |
|
| SET POINT |
| Set Point |
Programmable Alarm & Trip Setpoints for each Channel. |
| Dead Band |
Programmable from 0 - 254 |
| Setpoints Settings |
Hi for Alarm type Hi / Lo Programmable for Trip type |
| Output Relays |
8 |
| Control Action |
ON / OFF |
| Grouping of Rays |
Programmable |
| Alarm & Trip LEDs |
Commaon for both for each Channel. |
|
| INSTALLATION |
| Power Supply |
110/230 VAC, 50Hz |
| Operating Teperature |
0 to 60°C |
| Mounting |
Panel Mounted |
| Terminals |
Screw terminals suitable for conductors upto 1.5 Sq. mm. |
| Instrument Cabinet |
Sheet Metal |
| Bezel Size |
288 x 144 mm |
| Cutout Size |
282 x 138 mm |
| Depth |
50 mm |
